The inside effective height is increased to allow the washing of bulky material such as pallets, tanks, bins and pallet boxes.
Increases productivity and cuts utilisation costs in half in terms of labour, water and electricity consumption. The depth of this model doubles the washing capacity compared to equivalent models on the market.
The LCF 1500 3P A 4K washing system is the most powerful in its class and is designed to achieve the best possible result. In fact, the rack is specially designed to allow the water jet to reach any angle through rotating stainless steel arms placed above and below the material to be washed.
Equipped with three openings with guillotine doors and a wheeled rack, LCF 1500 3P A 4’s pass-through system significantly increases productivity by reducing loading/unloading downtime.
Made entirely of AISI 304 stainless steel with double insulated walls to reduce noise pollution and energy consumption, LCF 1500 3P A 4K guarantees high load capacity, low costs and a very high hygiene standard.
The washing chamber is large and free of any obstructions that could allow dirt and bacteria to nest.
Thanks to the depth of the rack, it can wash twice as much as a standard machine, while maintaining the same performance and guaranteeing half the consumption.
The special washing system with booster and rotating arms is fed by powerful pumps capable of solving material soiling problems even in environments with high production requirements but limited space.
The washing system is designed to reuse clean rinse water, minimising water and electricity consumption.
Some Productivity:
It draws steam from the machine both during rinsing and at the end of the cycle (even with the door open).
It recovers energy through heat exchange. Extractor with battery kW 0.18.
An additional cycle atomises the disinfectant to ensure a contact time of 40 sec. before rinsing at 85 C°, thus achieving chemical and thermal disinfection.
Ideal for those sectors where temperature control of washing is essential (e.g. meat/dairy/poultry).
The system keeps the wash cycle at 50 C° for protein treatment.
In facilities equipped with centralised control of electricity consumption, the system allows the disconnection of resistors by the central computer to lower the total absorption of the cycle.
It feeds the rinse from a storage tank with a pressure booster pump, separating the machine from the external supply line.
It allows the machine to be cleaned or the material to be pre-washed before the cycle.
Four special reinforced rubber wheels with stainless steel support and bearings. They are equipped with a front brake and a pin for levelling the machine. With flexible drains, the kit allows the machine to be moved for local cleaning.
When the product canister empties, an audible alarm goes off. It is compatible with both detergent and disinfectant.
Coaxial system for internal washing of pipes of different sizes.
RIGHT / LEFT side table with lower shelf. Dimensions mm 1500×1000.
Single-hole pre-wash showerhead with taps for hot/cold water regulation.
A wide range of holders, which can be tailored to specific needs, allows for the washing of the most diverse types of materials used in a variety of sectors.
Via F. Petrarca 37-43
20030 Senago (MI)
Tel. +39 02 366 49500
Fax + 39 02 366 49519
info@veloxbarchitta.it
P. IVA 09170190152
