Washes dishes, cookware and trays with less detergent and less labour.
The LP 1000 3P washing system is designed to achieve the best possible result. The rack is specially designed to allow the water jet to reach any angle through rotating stainless steel arms placed above and below the material to be washed.
Equipped with three openings with guillotine doors and a wheeled rack, LP 1000 3’s pass-through system significantly increases productivity by reducing loading/unloading downtime.
It can be equipped with the Double Power system, which allows the use of two different washing pump power outputs via a selector switch for excellent cleaning of dishes and cookware with two different pressures.
Made entirely of AISI 304 stainless steel, it guarantees high loading capacity, low costs and a very high hygiene standard.
The washing chamber is large and free of any obstructions that could allow dirt and bacteria to nest.
Thanks to the depth of the rack, it can wash twice as much as a standard machine, while maintaining the same performance and guaranteeing half the consumption.
The special washing system with booster and rotating arms is fed by powerful pumps capable of solving material soiling problems even in environments with high production requirements but limited space.
The washing system is designed to reuse clean rinse water, minimising water and electricity consumption.
Some Productivity:
It draws steam from the machine both during rinsing and at the end of the cycle (even with the door open).
It recovers energy through heat exchange. Extractor with battery kW 0.18.
An additional cycle atomises the disinfectant to ensure a contact time of 40 sec. before rinsing at 85 C°, thus achieving chemical and thermal disinfection.
Ideal for those sectors where temperature control of washing is essential (e.g. meat/dairy/poultry).
The system keeps the wash cycle at 50 C° for protein treatment.
In facilities equipped with centralised control of electricity consumption, the system allows the disconnection of resistors by the central computer to lower the total absorption of the cycle.
It feeds the rinse from a storage tank with a pressure booster pump, separating the machine from the external supply line.
It allows the machine to be cleaned or the material to be pre-washed before the cycle.
Four special reinforced rubber wheels with stainless steel support and bearings. They are equipped with a front brake and a pin for levelling the machine. With flexible drains, the kit allows the machine to be moved for local cleaning.
When the product canister empties, an audible alarm goes off. It is compatible with both detergent and disinfectant.
It keeps the canisters suspended from the floor for hygiene and cleanliness purposes. It can be installed on the right or left.
NB: increases the width of the machine by 300 mm.
A wide range of holders, which can be tailored to specific needs, allows for the washing of the most diverse types of materials used in a variety of sectors.
Special washing system for plates and trays. A regulator increases the power of the wash pump from kW 1.45 to kW 2.9.
RIGHT / LEFT side table with lower shelf. Dimensions mm 1000×830,5x932x5h
Via F. Petrarca 37-43
20030 Senago (MI)
Tel. +39 02 366 49500
Fax + 39 02 366 49519
info@veloxbarchitta.it
P. IVA 09170190152
